Crystal Resin for Extra Large Decorations DEKORA EXTREM 300-120-300 Low Viscosity UV++

Product detailed description

Dekora 300-120-300 UV++ Crystal Resin for Extra Large Decorations is a low-viscosity epoxy resin designed for creating medium, large, and extra-large decorations

Advantages:
- Ultra clear
- High resistance to yellowing
- Very good self-deaeration
- Perfectly glossy surface after pouring and curing
- Low to medium viscosity
- Very long processing time

For resin products:
- products up to 300mm casting height
- Large decorations: large letters and numbers, spheres, cubes, cuboids, crystals, cones, cylinders, prisms, pyramids, candle holders, paperweights
- wood with resin: lamps and other wet products
- Bowls: bowls, dishes, jars, boxes
- Orgonites: pyramids and other shapes

These moulds can be used for casting:
- silicone moulds for large decorations (large spheres and cubes, larger 3D shapes, pyramids, large letters and numbers)
- silicone moulds for bowls, jars, boxes and candle holders
- silicone mould for orgonites
- silicone moulds for ashtrays
- silicone moulds for tables (large circular and square shapes)

Properties:
- Two-component resin (component A resin / component B hardener)
- UV stable ++
- perfectly clear
- density after mixing component A+B 300 mPa.s (300mPa.s extra thin - 9000mPa.s extra thick)
- weight mixing ratio 100:40
- volume mixed at once 50 litres
- maximum casting layer height 300mm
- provides surface and casting hardness of 84 Shore D after curing (56 Shore D medium hard - 90 Shore D very hard)
- processing time 24 hours
- curing time 120 - 168 hours (depending on ambient temperature and amount of material cast)
- Ideally processed at 22 - 23 °C
- Sanding and polishing finishing

Pigmentation and colouring:
- For transparent colouring, use resin dyes
- For opaque colouring, use resin pigments
- Luminous powder or metallic powder can be added to the resin to give it a specific appearance
- Decorative materials can be added to the resin - glitter, dried flowers and decorative flakes

Packaging:
sum of component A+B

Warning:
- When pouring porous materials, it is recommended to seal the surface of these materials first with a primer to prevent bubbles from entering the resin during curing (e.g. jewellery in combination with wood and resin)
- The processing temperature (mixing, casting) must not fall below 20 °C.
- Temperature fluctuations must not occur during curing - a negative effect on the cured surface.
- The mixing ratio of component A + B is by weight. To maintain the ratio, we do not recommend volumetric measurement; both components must be weighed!

The substance mixture is classified as hazardous (EC) No. 1272/2008
Component A
Irritating to skin.
Causes serious eye irritation.
May cause an allergic reaction.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life,
with long lasting effects.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P264 After handling, wash hands and
affected body parts thoroughly.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs:
Get medical advice/attention.
P337+P313 If eye irritation persists:
Get medical advice/attention.
Component B
Irritating to skin.
Causes severe skin burns and eye damage.
May cause an allergic reaction.
Harmful if swallowed or if inhaled.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life,
with long lasting effects.
H302+H332 Harmful if swallowed or
if inhaled.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P273 Avoid release to the environment.
P301+P330+P331 IF SWALLOWED: Rinse mouth.
Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a doctor. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
rinse with water. Remove contact
lenses, if present and easy to remove.
Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container by handing over to an authorised person
for waste disposal or
return to the supplier.