Crystal Resin for Extra Large Decorations TABULA EXTREM 300-120-300 Low Viscosity UV++
Code: 30577
Related products
Product detailed description
Crystal resin TABULA EXTREM 300-120-300 UV++ – for extra large tabletops and river tables
TABULA EXTREM 300-120-300 UV++ is a crystal clear, extra-low viscosity epoxy resin specifically developed for extremely large tabletops, river tables, and massive castings. Thanks to its very low viscosity, it flows excellently, self-degasses, and cures to a perfectly glossy, clear surface. The very long processing time allows for safe pouring of high layers up to 300 mm and mixed volumes up to 50 l at once.
Advantages of TABULA EXTREM resin
- Ultra clear epoxy resin with high resistance to yellowing (UV++)
- Very good self-degassing – minimum bubbles even in high castings
- Low to medium viscosity for easy pouring of large areas and massive volumes
- Very long processing time – ideal for extra-large table projects
- After pouring and curing, a perfectly glossy, smooth surface
Applications – where TABULA EXTREM makes the most sense
- Casting height: up to 300 mm (depending on material quantity, mold size, and conditions)
- Tabletops and river tables: massive "river table", large slabs combined with wood and resin
- Large decorations: large letters and numbers, spheres, cubes, cuboids, crystals, cones, cylinders, pyramids, large candle holders and paperweights
- Wood + Resin: lamps, large blocks, massive design elements
- Bowls and containers: larger bowls, containers, boxes
- Organites: large pyramids and other tall 3D shapes
Recommended moulds
- Silicone molds for large decorations: large spheres, cubes, 3D shapes, pyramids, large letters and numbers
- Silicone molds for bowls, containers, boxes, and candle holders
- Silicone molds for orgonites
- Silicone molds for tables: large round and square molds for tabletops
Properties and Technical Parameters
| Type | Two-component epoxy resin (component A – resin / component B – hardener) |
| UV stability | UV stable ++ |
| Clarity | Perfectly clear |
| Viscosity after mixing A+B | 300 mPa·s (300 mPa·s = extra thin → 9000 mPa·s = extra thick) |
| Mixing ratio (by weight) | 5 : 2 (A : B) |
| Maximum mixed volume at once | up to 50 l |
| Maximum casting layer height | up to 300 mm |
| Processing time | approx. 24 hours |
| Curing time | approx. 120–168 hours (depending on ambient temperature and amount of cast material) |
| Processing temperature | ideally 22–23 °C (should not drop below 20 °C) |
| Finishing | sanding and polishing |
| Final hardness | approx. 84 Shore D |
Pigmentation and Colouring
- for transparent coloring use resins dyes,
- for opaque coloring, choose high-quality resins pigments,
- possible additives: glow powder, metallic powder, glitters, dried flowers, decorative flakes.
Usage notes
- When casting porous materials (e.g. wood), it is recommended to seal the surface with a penetration first to prevent bubbles from rising during curing,
- working temperature (mixing, pouring) must not drop below 20 °C,
- During curing, protect castings from temperature fluctuations that can negatively affect the surface appearance,
- The mixing ratio is always by weight – therefore, carefully weigh components A and B; volumetric measurement is not recommended.
More, for example, in the article on epoxy resins of the TABULA series.
Safety and classification
The substance mixture is classified as hazardous (EC) No. 1272/2008
Component A
Standard hazard statements:
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P264 Wash hands and affected body parts thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
Component B
Standard hazard statements:
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects.
H302+H332 Harmful if swallowed or if inhaled.
Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
Avoid inhaling dust/fume/gas/mist/vapors/aerosols.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container to an authorised waste disposal plant or return to supplier.
Additional parameters
| Category: | Epoxy resins with a new formula |
|---|---|
| Usage: | Wood, Tables |
| Product type: | Casting resin |
| Max. casting layer: | 300mm |
| Curing time: | 120h |
| ? Density mPA.s: | 300 |
| ? Mixed volume at once: | 50L |
| Finální tvrdost: | 84 Shore D |
Be the first who will post an article to this item!
Be the first who will post an article to this item!
E-Shop Obchodprobydleni.cz focuses on selling casting resin from a Czech manufacturer under the PourArt brand. PourArt casting resin is designed for the production of furniture from resin, jewellery from resin, various decorations from resin and pictures from resin. We supplement the range of casting resin with other accessories for epoxy resin products. We focus on decorations for casting resin, resin grinding and polishing, resin moulds and other necessary tools and materials for working with casting resin.