Silicone Mould Bangle Rhombus Pattern Inner Diameter 57 mm

Product detailed description

What you can create with the mould

Elegant diamond texture bracelets – from minimalist clear designs to bold glitter or marble effects. Great for limited editions, sets and gifts.

Why choose this mould

• Textured surface enhances mica, pearlescent and transparent colours.
• Glossy finish straight from the mould, minimal finishing required.
• Flexible silicone for easy removal without cracking the cast.
• Repeated use – suitable for epoxy and UV resins.

Parameters

How to properly cast a bracelet

1. Preparation: rinse the mould with lukewarm water and mild soap, let it dry (lint-free).
2. Mixing: prepare the resin according to the manufacturer's instructions, work slowly to avoid bubbles.
3. Pouring: pour in a thin stream, ideally in two steps (bottom layer + effect layer).
4. Curing: let it cure according to the system; do not expose the mould to local overheating.
5. Removal & finish: gently loosen the edges, pop it out; any remaining "collar" can be lightly sanded.

Tips for a perfect result

• Bubbles: Degassing the mixture or pouring along the side of the mould helps keep the texture clean.
• Colour effects: Transparent tones, pearlescent and fine glitter work beautifully on textured surfaces.
• Size: 57 mm is more like S–M; when making a gift, we recommend measuring the instep/knuckles of the hand beforehand.

Maintenance

• Cleaning: lukewarm water + mild soap; do not use abrasives or sharp tools.
• Solvents: no aggressive cleaners; use isopropanol only exceptionally and wipe quickly.
• Storage: flat, away from sunlight and without compression to prevent deformation.

Good for

• Resin Colours and Pigments »
• Tools (cups, pipettes, sticks) »
• Other Resin Moulds »