PourArt Silicone for Mould Making Platinum 25SH 1kg

Product detailed description

Platinum 25SH Mould Silicone is a two-component silicone for making resin casting moulds. The resulting mould is more elastic (20SH very soft silicone, 30SH medium hardness silicone and 40SH harder silicone). Platinum 25SH Silicone self-degasses very well, is very fine - characterised by perfect flow and perfectly copies the surface of the shape being scanned. It is very tough and very resistant to tension with a low shrinkage rate (loss) of 0.1% after curing.

Advantages:
- odourless
- good spontaneous air release
- perfectly copies the surface of the scanned shape
- tough
- low shrinkage rate (loss) of 0.1%
- Fast curing

For mould making:
- Jewellery
- Figurines
- Decorations
- Paperweights
- 3D shapes

Properties:
- Two-component silicone for mould making
- Mixing ratio by weight 1:1
- Mixed volume of 1 litre at a time
- Maximum casting layer height 100mm
- provides a hardness of 25 Shore A after curing
- Processing time: 10 minutes
- Curing time: 12-16 hours (depending on ambient temperature and amount of material cast)
- Ideally processed at 22 - 23 °C

Packaging:
1kg, total of component A+B

Warning:
Mix both components very thoroughly. Mix slowly for 4-5 minutes.