Crystal Clear Flower Resin FLOWERA 50-48-950 Medium Viscosity UV++ 1kg

Product detailed description

FLOWERA 50-48-950 UV++ crystal resin is a medium-density epoxy resin designed for dried flowers and beetles

Advantages:
- Ultra clear
- High resistance to yellowing
- Very good self-deaeration
- Perfectly glossy surface after pouring and curing
- Low to medium viscosity
- Extended processing time

For resin products:
- Products up to 50mm casting height
- Dried flowers: dry matter, beetles, insects, dried flowers

These moulds can be used for casting:
- Silicone molds for small decorations (balls, cubes, smaller 3D shapes, pyramids, crystals, paperweights)
- silicone moulds for large decorations (large spheres and cubes, larger 3D shapes, pyramids, large letters and numbers)

Properties:
- Two-component resin (component A resin / component B hardener)
- UV stable ++
- Ultra clear
- density after mixing component A+B 950mPa.s (300mPa.s extra low viscosity - 9000mPa.s extra high viscosity)
- Weight mixing ratio 3:1
- Mixed volume of 5 litres at a time
- Maximum casting layer height 50mm
- After curing, it provides a surface and casting hardness of 86 Shore D (56 Shore D medium hard - 90 Shore D very hard)
- Processing time 50 minutes
- Curing time 48 hours (depending on ambient temperature and amount of material cast)
- Ideally processed at 22 - 23 °C
- Sanding and polishing finishing

Pigmentation and colouring:
- For transparent colouring, use resin dyes

Packaging:
1kg, total of component A+B

Warning:
- When pouring porous materials, it is recommended to seal the surface of these materials first with a primer to prevent bubbles from entering the resin during curing (e.g. jewellery in combination with wood and resin)
- The processing temperature (mixing, casting) must not fall below 20 °C.
- Temperature fluctuations must not occur during curing - a negative effect on the cured surface.
- The mixing ratio of component A + B is by weight. To maintain the ratio, we do not recommend volumetric measurement; both components must be weighed!

The substance mixture is classified as hazardous (EC) No. 1272/2008
Component A
Irritating to skin.
Causes serious eye irritation.
May cause an allergic reaction.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life,
with long lasting effects.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P264 After handling, wash hands and
affected body parts thoroughly.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs:
Get medical advice/attention.
P337+P313 If eye irritation persists:
Get medical advice/attention.
Component B
Irritating to skin.
Causes severe skin burns and eye damage.
May cause an allergic reaction.
Harmful if swallowed or if inhaled.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life,
with long lasting effects.
H302+H332 Harmful if swallowed or
if inhaled.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P273 Avoid release to the environment.
P301+P330+P331 IF SWALLOWED: Rinse mouth.
Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a doctor. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
rinse with water. Remove contact
lenses, if present and easy to remove.
Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container by handing over to an authorised person
for waste disposal or
return to the supplier.