Crystal resin for paintings and geodes LENTE PORTRETO RAPID 10-16-6000 thick UV++ 1kg

Code: CAN-1201AB-33
23,81 € / pcs 19,68 € excl. VAT
Není skladem
Delivery options
The item has been sold out…
LENTE PORTRETO RAPID – fast, thick resin for geodes and art paintings.

Detailed information

Bleskové odeslání
Objednávky v pracovní dny do 9:00 odesíláme tentýž den
Kurzy a workshopy
Máme vlastní online kurzy a workshopy - jak pracovat s pryskyřicí
Online podpora
Poradíme vám s výběrem i samotným procesem

Product detailed description

Crystal clear art resin LENTE PORTRETO RAPID 10-16-6000 UV++ for resin paintings, Geode Art and glass coating

Advantages:
- Fast curing
- Ultra clear
- High resistance to yellowing
- Very good self-deaeration
- Perfectly glossy surface after pouring and curing
- Thick
- Extended processing time

For resin products:
- Pictures: paintings, Geode Art, sea effect
- glasses: applying surface to thermo glasses and similar

Properties:
- Two-component resin (component A resin / component B hardener)
- UV stable ++ (UV low UV resistance - UV++ high UV resistance), does not yellow
- Ultra clear
- density after mixing component A+B 6000 mPa.s (300mPa.s extra low viscosity - 9000mPa.s extra high viscosity)
- Mixing ratio by weight 1:1
- mixed volume at once 1 litre
- Maximum casting layer height 10mm
- provides surface and cast hardness after curing, 81 Shore D (56 Shore D medium hard - 90 Shore D very hard)
- Processing time 30 minutes
- curing time 16 hours (depending on ambient temperature and amount of material cast)
- Ideally processed at 22 - 23 °C
- Sanding and polishing finishing

Pigmentation and colouring:
- For transparent colouring, use resin dyes
- For opaque colouring, use resin pigments
- Luminous powder or metallic powder can be added to the resin to give it a specific appearance
- Decorative materials can be added to the resin - glitter, dried flowers and metal decorative flakes
- For special effects, use alcohol inks or pastes for the "sea" effect

Packaging:
total component A+B 1kg

Warning:
- When pouring porous materials, it is recommended to first seal the surface of these materials with a primer to prevent bubbles from entering the resin during curing
- The processing temperature (mixing, casting) must not fall below 20 °C.
- Temperature fluctuations must not occur during curing - a negative effect on the cured surface.
- The mixing ratio of component A + B is by weight. To maintain the ratio, we do not recommend volumetric measurement; both components must be weighed!

NEBEZPECI-SLOZKA-AB-1

The substance mixture is classified as hazardous (EC) No. 1272/2008
Component A
Irritating to skin.
Causes serious eye irritation.
May cause an allergic reaction.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life,
with long lasting effects.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P264 After handling, wash hands and
affected body parts thoroughly.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs:
Get medical advice/attention.
P337+P313 If eye irritation persists:
Get medical advice/attention.
Component B
Irritating to skin.
Causes severe skin burns and eye damage.
May cause an allergic reaction.
Harmful if swallowed or if inhaled.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life,
with long lasting effects.
H302+H332 Harmful if swallowed or
if inhaled.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P273 Avoid release to the environment.
P301+P330+P331 IF SWALLOWED: Rinse mouth.
Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a doctor. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
rinse with water. Remove contact
lenses, if present and easy to remove.
Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container by handing over to an authorised person
for waste disposal or
return to the supplier.

Additional parameters

Category: Casting resin PourArt
Weight: 1 kg
Usage: Paintings, Geode, Sea
Volume: 1kg
Product type: Casting resin
Max. casting layer: 10mm
Curing time: 16h
? Density mPA.s: 6000
? Mixed volume at once: 1L
The item has been sold out…
5
2x
4
0x
3
0x
2
0x
1
0x
Do not fill out this field:
5
ZK Avatar of author | 25. 4. 2024
Naprostá spokojenost, dobře se s ní pracuje
5
IS Avatar of author | 20. 9. 2023
Tato pryskyřice je naprosto perfektní,velmi dobře se s ní pracuje

Be the first who will post an article to this item!

Do not fill out this field:

Security check

pourart-600E-Shop Obchodprobydleni.cz focuses on selling casting resin from a Czech manufacturer under the PourArt brand. PourArt casting resin is designed for the production of furniture from resin, jewellery from resin, various decorations from resin and pictures from resin. We supplement the range of casting resin with other accessories for epoxy resin products. We focus on decorations for casting resin, resin grinding and polishing, resin moulds and other necessary tools and materials for working with casting resin.