Doming UV Resin for 3D Stickers Elastic 200g

Product detailed description

Doming UV resin for 3D stickers elastic 200 g is a specially developed one-component resin for doming – i.e. creating a convex, 3D glossy surface on stickers, badges, and other surfaces. It cures under UV light, so there is no need to mix two components and wait long hours for curing. A thin layer, a few minutes under the lamp, and the product is ready.

What is the doming UV resin used for

This resin is primarily intended for thin layers with a convex 3D effect. It is ideal for:

• 3D stickers of premium quality,
• promotional and gift badges,
• logotypes and brand labels,
• small jewelry and decorative pendants with a doming effect.

We apply the resin to plastic stickers or badges so that after curing, a convex surface is created, which is clear, glossy, and protects the print. Stickers with this resin are more resistant to UV radiation and look much more presentable.

Advantages of Doming UV Resin

• Fast curing – ready in 3–5 minutes under a UV lamp,
• One-component system – no mixing A+B, ready to use,
• Ultra clear – preserves print colors and enhances the 3D effect,
• Flexible after curing – hardness approx. 25 Shore D, the surface is firm but still flexible.

Properties and Parameters

• Type: one-component UV resin for doming,
• UV stability: UV stable ++ (UV = lower resistance, UV++ = high UV resistance),
• Optics: Ultra clear, suitable for transparent 3D effect,
• Viscosity: Approx. 1000 mPa·s,
• Hardness after curing: Approx. 25 Shore D – firm but elastic,
• Ideal processing temperature: 22–23 °C.

Curing Time and Conditions

The resin cures under UV light in the 365–405 nm spectrum. Curing time depends on the lamp's power, layer thickness, and distance from the surface.

The lamp distance needs to be tested under specific conditions – it can vary based on layer height and UV lamp power.

How to work with the resin

1. Prepare the substrate – sticker, badge, logo, or small piece of jewelry, and place it on a flat surface.
2. Slowly apply the doming UV resin so that it evenly covers the surface and creates the desired convex 3D effect.
3. Place the product under a UV lamp (9 W or 36 W) at a distance of approx. 5–10 cm.
4. Allow to cure for 3–5 minutes – depending on the lamp's power and layer thickness.
5. After curing, let the product cool for a while and it's ready for use.

Recommendations for the best result

• work in a clean and dust-free environment to keep the surface perfectly clear,
• before applying the resin, check that the substrate is dry, degreased and free of impurities,
• avoid working at temperatures below 20 °C – they prolong curing time and can affect surface properties.

Elastic 200g Doming UV Resin for 3D Stickers is a great choice for anyone who wants to quickly and easily elevate ordinary stickers, logos, or badges into a premium product with a professional 3D doming effect.