Epoxy Resin COUNTER TOP 10-24-858 UV++ 1kg

Product detailed description

COUNTER TOP 10-24-858 UV++ is a two-component epoxy resin designed to create a protective layer on resin products or furniture surfaces with increased scratch resistance. Certified for toy production.

Advantages:
A key advantage of COUNTER TOP 10-24-858 UV++ epoxy protection is its enhanced scratch resistance. Once cured, it provides a perfectly glossy and smooth surface and is highly stable against UV radiation. It can be used for toy production.
- Maximum protection against UV ++
- Certified for toy production
- Increased scratch resistance
- Very good self-levelling

For purposes:
Using COUNTER TOP 10-24-858 UV++ we create a final thick layer, 0.4 - 0.7mm to create a protective layer on resin or wood products. The thick layer is very suitable for final layers on products that we need to protect against scratches and UV radiation. These can be smaller products such as coasters or various decorations, as well as resin dining tables and bar counters.

Recommended for products:
- UV protective layer on resin products
- Increased scratch protection
- Protective thick layer coating for bar counters
- Protective thick layer coating for resin tables
- Protective thick layer coating for resin furniture
- Protective thick layer coating for resin coasters
- Protective coating for resin decorations
- On resin surfaces, to create a layer with increased scratch resistance

Properties:
- Two-component resin (component A resin / component B hardener)
- UV stable ++ (UV low UV resistance - UV++ high UV resistance), does not yellow
- Ultra clear
- Density after mixing component A+B 858mPa.s (300mPa.s extra thin - 9000mPa.s extra thick)
- Weight mixing ratio 3:1
- Mixed volume of 1 litre at a time
- Maximum cast layer height of 10mm, minimum height of 0.5mm
- Provides high surface hardness after curing, 90 Shore D (56 Shore D medium hard - 90 Shore D very hard)
- Processing time 30 minutes
- curing time 24 hours (depending on ambient temperature and amount of material cast)
- Ideally processed at 22 - 23 °C
- Sanding and polishing finishing

Packaging:
1kg, total of component A+B

Warning:
- When pouring porous materials, it is recommended to first seal the surface of these materials with a primer to prevent bubbles from entering the resin during curing
– the processing temperature (mixing, casting) must not fall below 20°C. Celsius
- Temperature fluctuations must not occur during curing - a negative effect on the cured surface.
- The mixing ratio of component A + B is by weight. To maintain the ratio, we do not recommend volumetric measurement; both components must be weighed!
- For perfect spreading and adhesion of a new layer with Top Glass Heat+ resin, we recommend sanding the resin substrate with 3000 grit sandpaper for resin sanding
- A new final layer on an existing product needs to be created (poured) at a sufficient height, at least 0.5mm, we recommend using a toothed spatula - a "comb".

The substance mixture is classified as hazardous (EC) No. 1272/2008
Component A
Irritating to skin.
Causes serious eye irritation.
May cause an allergic reaction.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life,
with long lasting effects.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P264 After handling, wash hands and
affected body parts thoroughly.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs:
Get medical advice/attention.
P337+P313 If eye irritation persists:
Get medical advice/attention.
Component B
Irritating to skin.
Causes severe skin burns and eye damage.
May cause an allergic reaction.
Harmful if swallowed or if inhaled.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life,
with long lasting effects.
H302+H332 Harmful if swallowed or
if inhaled.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P273 Avoid release to the environment.
P301+P330+P331 IF SWALLOWED: Rinse mouth.
Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a doctor. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
rinse with water. Remove contact
lenses, if present and easy to remove.
Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container by handing over to an authorised person
for waste disposal or
return to the supplier.