RENOVA DESK 1-24-775 UV++ Casting Resin for Surfaces 1kg

Code: RENOVA-HF3001
21,92 € / pcs 18,12 € excl. VAT 21,92 € / 1 kg
In stock (5 pcs)
Delivery to:
29. 9. 2025
Delivery options
RENOVA DESK Casting Resin – UV stable resin for high-hardness surfaces

Detailed information

Bleskové odeslání
Objednávky v pracovní dny do 9:00 odesíláme tentýž den
Kurzy a workshopy
Máme vlastní online kurzy a workshopy - jak pracovat s pryskyřicí
Online podpora
Poradíme vám s výběrem i samotným procesem

Product detailed description

RENOVA DESK 1-24-775 UV++ resin specially developed for dining table tops, bar counters and kitchen worktops

Advantages:
- very good levelling
- High resistance to yellowing
- Very good self-deaeration
- Perfectly glossy surface after pouring and curing
- Very high hardness after curing
- Low viscosity
- Extended processing time

For resin products:
- products up to a casting height of 1mm
- furniture surfaces: dining table tops, bar counters, kitchen worktops, dining tables, table tops
- Boards: board surfaces coated with resin

Properties:
- Two-component resin
- UV stable ++
- Weight mixing ratio 3:1
- Density after mixing both components 775 mPa.s (300mPa.s extra low viscosity - 9000mPa.s extra high viscosity)
- Provides a hardness of 90 Shore D after curing
- Casting up to a layer thickness of 1mm
- Working temperature 23 °C
- Workability 30-40 minutes (on the poured surface)
- Curing time 24 hours (depending on ambient temperature)
- Can be processed by grinding and polishing
- ! To finalise the surface for contact with food, use Abrasion-resistant lacquer for resin surfaces RENOVA DESK FINISCH 1-6-300 UV++

Pigmentation and colouring:
- For transparent colouring, use resin dyes
- For opaque colouring, use resin pigments
- We add metallic powders to the resin to achieve a specific appearance of the cured surface

Packaging:
1kg, total of component A+B

Warning:
- When coating boards, it is recommended to first apply a primer to the board
- The processing temperature (mixing, casting) must not fall below 20 °C.
- Temperature fluctuations must not occur during curing - a negative effect on the cured surface.
- The mixing ratio of component A + B is by weight. To maintain the ratio, we do not recommend volumetric measurement; both components must be weighed!

NEBEZPECI-SLOZKA-AB-1

The substance mixture is classified as hazardous (EC) No. 1272/2008
Component A
Irritating to skin.
Causes serious eye irritation.
May cause an allergic reaction.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life,
with long lasting effects.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P264 After handling, wash hands and
affected body parts thoroughly.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs:
Get medical advice/attention.
P337+P313 If eye irritation persists:
Get medical advice/attention.
Component B
Irritating to skin.
Causes severe skin burns and eye damage.
May cause an allergic reaction.
Harmful if swallowed or if inhaled.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life,
with long lasting effects.
H302+H332 Harmful if swallowed or
if inhaled.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P273 Avoid release to the environment.
P301+P330+P331 IF SWALLOWED: Rinse mouth.
Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a doctor. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
rinse with water. Remove contact
lenses, if present and easy to remove.
Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container by handing over to an authorised person
for waste disposal or
return to the supplier.

Additional parameters

Category: Casting resin PourArt
Weight: 1 kg
Usage: Cutting board, Dining tables, Bar counters, Kitchen cabinets, Jídelní stoly, Table tops
Volume: 1kg
Product type: Casting resin
Max. casting layer: 1mm
Curing time: 24h
? Density mPA.s: 775
? Mixed volume at once: 1L

Be the first who will post an article to this item!

Do not fill out this field:

Be the first who will post an article to this item!

Do not fill out this field:

Security check

pourart-600E-Shop Obchodprobydleni.cz focuses on selling casting resin from a Czech manufacturer under the PourArt brand. PourArt casting resin is designed for the production of furniture from resin, jewellery from resin, various decorations from resin and pictures from resin. We supplement the range of casting resin with other accessories for epoxy resin products. We focus on decorations for casting resin, resin grinding and polishing, resin moulds and other necessary tools and materials for working with casting resin.