SPEED 10-12-600 UV+ Casting Resin

Product detailed description

Speed 10-12-600 UV+ casting epoxy resin is a fast-curing, two-component epoxy resin designed for casting with a shortened curing time. Basic UV protection may, over time, manifest as yellowing on products. We recommend it for beginners due to its more favourable price or when using colours and metallic powders.

Advantages:
- Very good self-deaeration
- Perfectly glossy surface after pouring and curing
- Very high hardness after curing
- Low viscosity
- Fast curing

Disadvantages:
- Component B is slightly yellowish
- We recommend using it on coloured products with paint or pigment

For resin products:
- Products with a casting height of up to 10mm
- Keychains: letters, numbers and other shapes
- Resin beds: medallions, pendants
- Coasters: cake stands, coasters
- Boards: board surfaces coated with resin

These moulds can be used for casting:
- Silicone moulds for cake stands and wine racks
- Silicone moulds for trays
- Silicone moulds for coasters
- Silicone mould for key rings (various shapes and smaller letters and numbers)
- Silicone moulds for bookmarks
- Silicone moulds for jewellery
- Bezels and frames

Properties:
- Two-component resin (component A resin / component B hardener)
- UV stable (UV low UV resistance - UV++ high UV resistance)
- Clear, transparent, slightly yellowish in larger volumes
- Density after mixing components A+B 600mPa.s (300mPa.s extra low viscosity - 9000mPa.s extra high viscosity)
- Weight mixing ratio 100:60
- Volume mixed at once 1 litre
- Maximum casting layer height 10mm
- After curing provides high surface and cast hardness, 88 Shore D (56 Shore D medium hard - 90 Shore D very hard)
- Processing time 20 minutes
- Curing time 6-12 hours (depending on ambient temperature and amount of material cast)
- Ideal processing at 22 - 23 °C
- Machining by grinding and polishing

Pigmentation and colouring:
- For transparent colouring, use resin dyes
- For opaque colouring, use resin pigments
- Luminous powder or metallic powder can be added to the resin to give it a specific appearance
- Decorative materials can be added to the resin - glitter, dried flowers and decorative flakes
- Use alcohol inks for special effects

Packaging options:
1kg pack total component A+B 1kg
5Kg pack total component A+B 5kg, 5g pack contains 5x 1kg packs

Warning:
- When pouring porous materials, it is recommended to first seal the surface of these materials with a primer to prevent bubbles from entering the resin during curing
- The processing temperature (mixing, casting) must not fall below 20 °C.
- Temperature fluctuations must not occur during curing - a negative effect on the cured surface.
- The mixing ratio of component A + B is by weight. To maintain the ratio, we do not recommend volumetric measurement; both components must be weighed!

The substance mixture is classified as hazardous (EC) No. 1272/2008
Component A
Irritating to skin.
Causes serious eye irritation.
May cause an allergic reaction.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life,
with long lasting effects.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P264 After handling, wash hands and
affected body parts thoroughly.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs:
Get medical advice/attention.
P337+P313 If eye irritation persists:
Get medical advice/attention.
Component B
Irritating to skin.
Causes severe skin burns and eye damage.
May cause an allergic reaction.
Harmful if swallowed or if inhaled.
Harmful to aquatic life,
with long lasting effects.
List of standard hazard statements
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life,
with long lasting effects.
H302+H332 Harmful if swallowed or
if inhaled.
List of safety instructions
P101 If medical advice is needed, have product container or label at hand
or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P273 Avoid release to the environment.
P301+P330+P331 IF SWALLOWED: Rinse mouth.
Do NOT induce vomiting.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a doctor. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes
rinse with water. Remove contact
lenses, if present and easy to remove.
Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container by handing over to an authorised person
for waste disposal or
return to the supplier.