Woodworking Resin for Tables and Wood TABULA BASIC 50-72-600 Low Viscosity UV+

Product detailed description

TABULA BASIC 50-72-600 UV+ wood resin is a thin epoxy resin designed for making resin tables and casting wood with resin.

Advantages of TABULA BASIC resin

• Clear epoxy resin with UV+ (basic UV protection)
• Very good self-venting – fewer bubbles in the casting
• Perfectly glossy surface after pouring and curing
• Low viscosity – pours well into molds and around wood
• Long processing time – comfortable work even on larger tables

Suitable for which products

• Products up to casting height: up to 50 mm
• Resin tables – 'river' tables, small tables, tops
• Resin lamps in combination with wood
• Clocks with wood and resin
• Other decorations and carpentry products in combination wood + resin

Recommended moulds

• Silicone Moulds for Large Decorations
• Silicone molds for tables (large round and square molds)

Properties and Technical Parameters

Pigmentation and Colouring

For transparent tinting, use resin dyes. For opaque coloring, resins for resin are suitable. Basic UV protection makes sense especially for colored and pigmented tables, where any later yellowing of the clear mass will not be as noticeable.

Packaging variant

1 kg pack A+B = 1 kg
5 kg pack A+B = 5 kg

Recommendations for work

You can use the long processing time for self-venting of the resin. After weighing and thoroughly mixing both components, let the resin stand for approximately 60 minutes. Air bubbles introduced during mixing will rise to the surface and escape on their own.

Warning

• When casting porous materials (especially wood), it is recommended to seal the surface with a primer first to prevent bubbles from releasing into the resin during curing.
• The processing temperature (mixing, casting) must not fall below 20 °C.
• During curing, there must be no temperature fluctuations – they negatively affect the appearance and quality of the surface.
• The mixing ratio of component A + B is by weight. To ensure the correct ratio, we do not recommend volumetric measurement – both components must be weighed precisely.

More, for example, in the article on epoxy resins of the TABULA series.

Safety information

The substance mixture is classified as hazardous (EC) No. 1272/2008

Component A

Standard hazard statements:
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P264 Wash hands and affected body parts thoroughly after handling.
P273 Avoid release to the environment.
P280 Wear protective gloves.
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.

Component B

Standard hazard statements:
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H412 Harmful to aquatic life with long lasting effects.
H302+H332 Harmful if swallowed or if inhaled.

Precautionary statements:
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
Avoid inhaling dust/fume/gas/mist/vapors/aerosols.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Rinse skin with water or shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Continue rinsing.
P310 Immediately call a doctor.
P501 Dispose of contents/container to an authorised waste disposal plant or return to supplier.