Silicone mold orgonite 50 x 50 x 55 mm

Product detailed description

What you can create with the mould

Designer orgonite pyramids – clear and coloured, with metal shavings, minerals, glitter or metal flakes. Suitable as table decorations, for shelves, in gift sets and as a "paperweight".

Why choose this mould

• Glossy surface straight from the mould – less sanding and polishing.
• Flexible silicone for easy removal without damaging sharp edges.
• Ideal for layering materials (shavings, pebbles, decorations) without shifting.
• Reusable and easy to maintain.

How to Create Clean, Layered Orgonites

1. Mould Preparation: Rinse with lukewarm water and mild soap, dry with a lint-free cloth.
2. First (Clear) Layer: Pour a thin, clear layer and let it slightly thicken – this will create a bubble-free 'window'.
3. Material Insertion: Add a small amount of metal shavings/minerals; do not overfill to ensure the mixture flows well.
4. Subsequent Layers: Pour in thinner layers; allow the previous layer to slightly gel before adding the next to prevent elements from shifting.
5. Curing & Removal: Adhere to the curing times/temperature according to the resin; after curing, gently pull the mould away from the edges and push out the casting.

Design Tips

• Depth and Sparkle: Combine clear zones with pearl (mica) and fine glitter.
• Colour gradient: deeper at the bottom, lighter towards the top – the pyramid enhances the effect.
• Minerals: dry small stones beforehand; large pieces may create bubbles and tension.

Mould maintenance

• Cleaning: lukewarm water + mild soap; do not use abrasives or sharp tools.
• Solvents: no aggressive cleaners; use isopropanol only exceptionally and wipe quickly.
• Storage: flat, away from direct sunlight and without compression to prevent deformation of the mould.

Goes with